DWA-6K5-LP1EU_DO Single Phase Off-Grid Inverter
High-Efficiency Performance: Delivers pure sine wave output with a rated power of 6.5kW, power factor of 1, and a peak inverter efficiency of 94% at 48V DC, ensuring high-quality power conversion with minimal energy loss.
Advanced MPPT & Solar Input: Features 1 MPPT tracker supporting up to 9kW maximum PV array power, a wide MPPT voltage range of 60–450V DC, 500V maximum DC voltage, 80V start-up voltage, and 27A maximum input current for flexible solar configuration.
Versatile Battery System: Compatible with both Lithium and Lead-acid batteries (48V nominal, 42–56.4V range), featuring a maximum charge current of up to 120A and configurable PV/grid priority settings.
Reliable Off-Grid Power Continuity: Ensures seamless backup power with a transfer switch time of <10ms, dual AC outputs with intelligent load prioritization, and support for grid / generator / battery / battery-less operation; the 6.5K model supports parallel expansion up to 9 units (optional).
Smart Monitoring & Safety: Features IP20 indoor protection with an integrated LCD display and optional WiFi / RS485 / CAN remote monitoring, alongside comprehensive protections including over-voltage, overload, short-circuit, over-temperature, and surge protection.
Q1: What battery types are compatible?
A: Supports both Lithium (Li-ion/LiFePO4) and Lead-acid batteries, 48V nominal (42–56.4V range), max charge current 120A.
Q2: How much solar power can I connect?
A: Up to 9kW PV array via 1 MPPT tracker, 500V max DC, MPPT range 60–450V, 80V start-up, 27A max input current.
Q3: Can multiple units run in parallel?
A: Yes — the 6.5K model supports up to 9 units in parallel (optional) for scalable off-grid systems.
Q4: What is the transfer switch time?
A: Less than 10ms between AC input (grid/generator) and off-grid battery mode, ensuring seamless load continuity.
Q5: What certifications and protections are included?
A: Certified to IEC 62109-1/2, EN IEC 61000-6-1, EN IEC 61000-6-3. Protections: over-voltage, overload, short-circuit, over-temperature, surge. IP20 indoor only.
Q6: How do I monitor the inverter?
A: Built-in LCD display (real-time mode, load, input/output). Interfaces: RS485, CAN, with optional WiFi for app/cloud remote monitoring.
